Tubing parts (Connector, Tube/Nut, Other tubing parts)
Connector
Hand-tight EXP® fitting
Fitting for Connecting System and Main Column/Guard Cartridge
(Adjustable ferrule, Max. pressure: 137 Mpa)
| Product Number | Specification |
|---|---|
| XRHTF-01 | Hand-tight EXP® fitting (Hand-tight nut and titanium hybrid ferrule included) |
Fitting for connecting system and main column/guard cartridge is also available.
Replacement Ferrule
| Product Number | Specification |
|---|---|
| XRHTF-05 | Titanium hybrid ferrule (5/pack) |
*EXP® is a registered trademark of Optimize Technologies, Inc.
Handy connector 1
Features
- A ferrule integrated into a connector
- Handy connector 1 resists pressure to about 21 MPa. Handy connector 1 is suitable for tubing systems of relatively low pressure. Connection to a tubing system is easy because a ferrule is integrated into the connector.
- Metal free
- The whole connector is made from PEEK. Handy connector 1 is suitable for metal-free tubing systems using PEEK tubes.
| Product Number | Specification |
|---|---|
| XRP0203 | For tubing systems of 1/16″ outer diameter, 10-pack |
Handy connector 2
Features
- High pressure resistance and made from stainless steel
- Handy connector 2 resists pressure to about 42 MPa. Handy connector 2 is suitable for connection to the injection side of a column, to which high pressure is applied. It is also useful for connection of a guard column or a precolumn filter.
- Metal free
- The ferrule at the wetted part of the connector is made from PEEK. Handy connector 2 is suitable for metal-free tubing systems using PEEK tubes.
- Replaceable ferrule
- Ferrule needs to be replaced only when it deteriorates, and not the entire connector.
| Product Number | Specification |
|---|---|
| XRP0204 | For tubing systems of 1/16″ outer diameter, 2-pack |
| XRP0205 | Spare PEEK ferrule, 10-pack |
Tube/Nut
PEEK tube
| Product Number | Specification |
|---|---|
| XRPT01 | 1/16″ outer diameter, 0.127 mminner diameter, 3m length |
| XRPT02 | 1/16″ outer diameter, 0.25 mm inner diameter, 3m length |
| XRPT05 | 1/16″ outer diameter, 0.5 mm inner diameter, 3m length |
| XRPT08 | 1/16″ outer diameter, 0.8 mm inner diameter, 3m length |
Stainless steel tube
| Product Number | Specification |
|---|---|
| XRST02 | 1/16″ outer diameter, 0.25 mm inner diameter, 2m length |
| XRST05 | 1/16″ outer diameter, 0.5 mm inner diameter, 2m length |
| XRST08 | 1/16″ outer diameter, 0.8 mm inner diameter, 2m length |
| XRST20 | 1/8″ outer diameter, 2.18 mm inner diameter, 5m length |
Male nut for 1/16″ tubing system (Stainless steel)
| Product Number | Specification |
|---|---|
| XRONW | W type, P type 1/16″ 5-pack |
| XRONS | Old shimadzu type 1/16″ 5-pack |
| XRONJ | Old JASCO type 1/16″ 5-pack |
| XRONH | Old Hitachi type 1/16″ 5-pack |
Ferrule for 1/16″ tubing system (Stainless steel)
| Product Number | Specification |
|---|---|
| XRONFA | 1/16″ one ring ferrule, 5-pack |
Female nut for 1/8″ tubing system, cap nut (Stainless steel)
| Product Number | Specification |
|---|---|
| XRON8 | 1/8″ female nut, 5-pack |
Ferrule for 1/8″ tubing system (Stainless steel, double ring)
| Product Number | Specification |
|---|---|
| XRTWFA | Front ferrule, back ferrule, 5-pack each |
Other tubing parts
Tube cutter
| Product Number | Specification |
|---|---|
| XRP1909 | For cutting 1/16″ stainless tubing |
Union for 1/16″ tubing system (stainless steel)
| Product Number | Specification |
|---|---|
| XRUNW | 1/16″ Tubing system |
Union for 1/16″ tubing system (PEEK)
| Product Number | Specification |
|---|---|
| XRUN16P | 1/16″ Tubing system |
Column coupler
| Product Number | Specification |
|---|---|
| XRCP1602 | 1/16″ outer diameter, 0.25 mm inner diameter |
| XRCP1605 | 1/16″ outer diameter, 0.5 mm inner diameter |
| XRCP1620 | 1/16″ outer diameter, 0.8 mm inner diameter |
